Classification complete
3906 90 90
Other acrylic polymers in unworked form
The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 39069090.
Code 3906 90 90 · Subheading 3906 90
Final code reached
This is a complete 8-digit customs code. There is no further code choice to make below it.
This code covers acrylic polymers in unworked form that are not poly(methyl methacrylate) or one of the specifically listed acrylic polymers and copolymers covered by other codes. The product must therefore be an acrylic polymer in unworked form and not match one of those listed products.
For example
Official tariff text
Acrylic polymers in primary forms (excl. poly"methyl methacrylate", poly[N-"3-hydroxyimino-1,1-dimethylbutyl"acrylamide], copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate in the form of a solution in N,N-dimethylacetamide, containing by weight >= 55% of copolymer, copolymer of acrylic acid with 2-ethylhexyl acrylate containing by weight >= 10% but <= 11% of 2-ethylhexyl acrylate, copolymer of acrylonitrile with methyl acrylate modified with polybutadiene-acrylonitrile "NBR", polymerization product of acrylic acid with alkyl methacrylate and small quantities of other monomers for use as a thickener in the manufacture of textile printing pastes and copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight >= 50% of methyl acrylate, whether or not compounded with silica)
Classification complete
3906 90 90
The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 39069090.
Compare the sibling codes at this level before you settle on this one.
Classification decides the rate here: from 0.0% to 6.5%.
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Trade-defence measures, such as anti-dumping duty, may apply to goods originating in Korea, Republic of (South Korea); any country except Korea, Republic of (South Korea); Türkiye.
The duty depends on the producer or exporter, so two shipments of the same goods can be charged differently.
This is recorded on a more detailed code below this one, so it may not cover your goods.
Check this code in the official EU TARIC databasePreferential rates exist for goods originating in Andorra; San Marino; Türkiye; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; Western Sahara; 52 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC databaseImport restrictions are recorded for goods originating in Ukraine; any country; Iran, Islamic Republic of; North Korea (Democratic People’s Republic of Korea).
Document or certificate conditions are recorded. Customs may ask for:
What Norwegian customs charges when goods like these are imported into Norway.
39.06.9000
Other
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
What UK customs charges when goods like these are imported into the UK.
3906 90 90 17
Superabsorbent polymers, insoluble in water, which result from a polymerization of acrylic monomer molecules with crosslinkers to form crosslinked polymer networks, with a high capacity to absorb and retain water and aqueous liquids
3906 90 90 23
Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm
3906 90 90 28
Mixture containing by weight: -80 % or more but not more than 90 % of a core shell polymer of butyl acrylate, ethyl acrylate, methyl-acrylate and allyl methacrylate (CAS RN 73026-23-0) and -10 % or more but not more than 20 % of a copolymer of methyl methacrylate and ethyl acrylate (CAS RN 9010-88-2)
3906 90 90 43
Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)
3906 90 90 50
Polymers of esters of acrylic acid with one or more of the following monomers in the chain:<br> <br><br><br>- chloromethyl vinyl ether,<br> <br><br><br>- chloroethyl vinyl ether,<br> <br><br><br>- chloromethylstyrene,<br> <br><br><br>- vinyl chloroacetate,<br> <br><br><br>- methacrylic acid,<br><br><br><br>- butenedioic acid monobutyl ester,<br><br><br><br>- butenedioic acid monocyclohexyl ester<br>containing by weight not more than 5 % of each monomer unit
3906 90 90 58
Mixture of polymers, containing by weight: -77 % or more but not more than 81 % of polyacrylamide (CAS RN 9003-05-8), -18 % or more but not more than 21 % of polyethylene glycol (CAS RN 25322-68-3)
3906 90 90 60
Aqueous dispersion containing by weight:<br> <br><br><br>- more than 10 % but not more than 15 % of ethanol, and<br> <br><br><br>- more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative<br>
3906 90 90 71
Acrylonitrile-styrene-acrylate copolymer in the form of granules containing by weight: -48 % of styrene, -22 % of acrylonitrile, -29 % of butylacrylate, and -1 % of dihydrodicyclopentadienyl acrylate
3906 90 90 73
Preparation containing by weight:<br> <br><br><br>- 33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,<br> <br><br><br>- 24 % or more but not more than 28 % of propylene glycol, and<br> <br><br><br>- 37 % or more but not more than 41 % of water<br>
3906 90 90 90
Other
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
Before you use the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
That code is specifically for copolymers of acrylic acid and 2-ethylhexyl acrylate with 2-ethylhexyl acrylate at least 10 weight percent but not more than 11 weight percent.
That code is specifically for copolymers of acrylonitrile and methyl acrylate modified with polybutadiene acrylonitrile, known as NBR.
That code is specifically for polymerisation products of acrylic acid with alkyl methacrylate and small amounts of other monomers, intended as a thickener for textile printing inks.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.