Heading 3925 · Chapter 39
Plastic building equipment not covered by the neighbouring categories
This code covers plastic equipment used in or on buildings, including the construction parts, fittings and other building items listed under its subcategories. It does not cover the separate plastic product groups named by the neighbouring categories.
For example
- A plastic tank with a capacity over 300 litres
- A plastic door with its frame
- Plastic shutters or blinds
- Plastic roof gutters and fittings
See the official tariff text
Official tariff text
Builders' ware of plastics, n.e.s.
More detailed codes
Pick the description that best matches your product.
4 codes below this one
- 3925 10 Reservoirs, tanks, vats and similar containers, of plastics, with a capacity of > 300 l 6.5%* Save
- 3925 20 Doors, windows and their frames and thresholds for doors, of plastics 6.5%* Save
- 3925 30 Shutters, blinds, incl. Venetian blinds, and similar articles and parts thereof, of plastics (excl. fittings and similar articles) 6.5%* Save
- 3925 90 Building elements for the manufacture of floors, walls, partition walls, ceilings, roofs, etc., of plastics; gutters and accessories of plastics; railings, fences and similar barriers, of plastics; large shelves, for assembly and permanent installation in shops, workshops, etc., of plastics; architectural ornaments, e.g. friezes, of plastics; fittings and similar products for permanent mounting on buildings, of plastics 6.5%* Save
No codes match
Try a shorter word, or search the whole tariff instead.
Compare the sibling codes
Classification decides the rate here: from 0.0% to 6.5%.
- 3901 Polymers of ethylene, in primary forms 0.0–6.5%*
- 3902 Polymers of propylene or of other olefins, in primary forms 0.0–6.5%*
- 3903 Polymers of styrene, in primary forms 0.0–6.5%*
- 3904 Polymers of vinyl chloride or of other halogenated olefins, in primary forms 0.0–6.5%*
- 3905 Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers, in primary forms 0.0–6.5%*
- 3906 Acrylic polymers, in primary forms 0.0–6.5%*
- 3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms 0.0–6.5%*
- 3908 Polyamides, in primary forms 6.5%*
- 3909 Amino-resins, phenolic resins and polyurethanes, in primary forms 0.0–6.5%*
- 3910 Siliconer, i ubearbejdet form 6.5%*
- 3911 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other polymers and prepolymers produced by chemical synthesis, n.e.s., in primary forms 0.0–6.5%*
- 3912 Cellulose and its chemical derivatives, n.e.s., in primary forms 0.0–6.5%*
- 3913 Natural polymers, e.g. alginic acid, and modified natural polymers, e.g. hardened proteins, chemical derivatives of natural rubber, n.e.s., in primary forms 5.0–6.5%*
- 3914 Ionbyttere på basis af polymerer henhørende under pos. 3901 til 3913, i ubearbejdet form 6.5%*
- 3915 Waste, parings and scrap, of plastics 6.5%*
- 3916 Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked 6.5%*
- 3917 Tubes, pipes and hoses, and fittings therefor, e.g. joints, elbows, flanges, of plastics 5.3–6.5%*
- 3918 Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, in rolls with a width of >= 45 cm, consisting of a layer of plastics fixed permanently on a backing of any material other than paper, the face side of which is grained, embossed, coloured, design-printed or otherwise decorated 6.5%*
- 3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls (excl. floor, wall and ceiling coverings of heading 3918) 0.0–6.5%*
- 3920 Plates, sheets, film, foil and strip, of non-cellular plastics, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918) 0.0–6.5%*
- 3921 Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, or of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918) 6.5%*
- 3922 Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics 6.5%*
- 3923 Articles for the conveyance or packaging of goods, of plastics; stoppers, lids, caps and other closures, of plastics 0.0–6.5%*
- 3924 Tableware, kitchenware, other household articles and toilet articles, of plastics (excl. baths, shower-baths, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware) 6.5%*
-
3925 Builders' ware of plastics, n.e.s. you are here 6.5%*
- 3926 Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. 6.5%*
Check the neighbouring codes
The codes just before and after this one, in case a nearby group fits better.
Tableware, kitchenware, other household articles and toilet articles,…
Builders' ware of plastics, n.e.s.
Articles of plastics and articles of other materials of heading 3901 …
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.