Classification complete
4403 21 10
Round pine logs for sawing, with a minimum cross-section of 15 cm or more
The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 44032110.
Code 4403 21 10 · Subheading 4403 21
Final code reached
Round pine logs for sawing, with a minimum cross-section of 15 cm or more
This is a complete 8-digit customs code. There is no further code choice to make below it.
This covers roundwood of Pinus species intended for sawing, with a minimum cross-section of 15 cm or more. The wood may be unworked, debarked, debranched or roughly shaped.
For example
- Round Pinus pine logs for sawing with a minimum cross-section of 15 cm or more
- Debarked round pine logs for sawing with a minimum cross-section of 15 cm or more
- Debranched round pine logs for sawing with a minimum cross-section of 15 cm or more
Save
See the official tariff text
Official tariff text
Sawlogs of pine "Pinus spp.", of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
One last check
Compare the sibling codes at this level before you settle on this one.
-
you are here 4403 21 10 Sawlogs of pine "Pinus spp.", of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared Duty free*
- another option 4403 21 90 Pine "Pinus spp." in the rough, of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excl. sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) Duty free*
Trade measures to be aware of
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
-
Lower duty for goods from some countries
Preferential rates exist for goods originating in Andorra; San Marino; Türkiye; European Union; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; 33 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database -
Restrictions and paperwork
Import restrictions are recorded for goods originating in Belarus; North Korea (Democratic People’s Republic of Korea); Iraq; Syria; Ukraine; Russian Federation; Indonesia; any country except Switzerland; 2 more origins.
Document or certificate conditions are recorded. Customs may ask for:
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
Check this code in the official EU TARIC databaseShow all 12 document conditions
- Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Exemption from official controls for plants, other than plants for planting, plant products and other objects, which form part of passengers’ personal luggage and are intended for personal consumption or use (Regulation (EU) 2019/2122 Article 7d)
- Goods with third country origin coming from Switzerland, according to the relevant EU legislation.
- Common Health Entry Document for Plants and Plant Products (CHED-PP) (as set out in Part 2, Section C of Annex II to Commission Implementing Regulation (EU) 2019/1715 (OJ L 261))
- Exemption for products intended for scientific purposes in accordance with Article 48(1) of Regulation (EU) 2016/2031
Export to Norway
What Norwegian customs charges when goods like these are imported into Norway.
-
44.03.2111
Wood for pulping
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
-
44.03.2112
Saw wood
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
-
44.03.2119
Other
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
-
44.03.2191
Wood for pulping
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
-
44.03.2192
Saw wood
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
-
44.03.2199
Other
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
Export to the United Kingdom
What UK customs charges when goods like these are imported into the UK.
-
All 2 UK lines under this code
They all have the same duty rates shown here.
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
Before you use the code
Check the facts that sit outside the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
- The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
- Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
- Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
Similar products elsewhere in the tariff
- 4407 11 10 Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm, end-jointed, whether or not planed or sanded (excl. of S-P-F spruce&pine&fir) No rate on file
- 4407 11 90 Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. end-jointed, planed, and of S-P-F spruce&pine&fir) No rate on file
- 4407 11 20 Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm, planed (excl. end-jointed, and of S-P-F spruce&pine&fir) No rate on file
- 4407 13 00 S-P-F (spruce "Picea spp.", pine "Pinus spp." and fir "Abies spp.") sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm Duty free*
- 4407 19 90 Coniferous wood sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. pine "Pinus spp.", fir "Abies spp.", spruce "Picea spp.", S-P-F, Hem-fir, end-jointed and planed) No rate on file
Often confused with
-
4403 21 90
Pine "Pinus spp." in the rough, of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excl. sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
Duty free*
This code covers the roundwood form, while 4403 21 90 specifically excludes roundwood.
-
4407 11 10
Pine "Pinus spp." sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm, end-jointed, whether or not planed or sanded (excl. of S-P-F spruce&pine&fir)
No rate on file
This code covers unworked or roughly shaped roundwood, while 4407 11 10 covers pine sawn or cut lengthwise, with a thickness over 6 mm.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.