Code 4403 25 10 · Subheading 4403 25

Final code reached

Conifer roundwood for sawing, at least 15 cm, excluding pine, spruce and fir

This is a complete 8-digit customs code. There is no further code choice to make below it.

This covers untreated conifer roundwood intended for sawing, with a minimum cross-section of at least 15 cm. It may be barked, branch-free or roughly shaped, but does not include pine, spruce or fir, railway sleepers, or wood treated with paint, stain, creosote or other wood preservatives.

For example

A conifer roundwood log for sawing, with a minimum cross-section of at least 15 cm, from a species other than pine, spruce or fir

Save

See the official tariff text

Official tariff text

Sawlogs, coniferous, of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excl. pine, fir and spruce; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)

The path to this code

Every level is settled. Open an earlier step if you need to change a choice.

Step 5 of 5 · Complete

Step 1 · Section IX Wood and articles of wood; wood charcoal; cork and …
Is the item made of wood or charcoal, made of cork, or a basketry or other product made of plaiting materials?
✓
Step 2 · Chapter 44 Wood and articles of wood; wood charcoal 1 of 3 chapters in section IX
Is it charcoal, firewood or wood waste, raw or sawn wood, a wood-based panel, a building or packaging product, cooperage, a tool or tool part, kitchenware, a decorative or household article, or another article of wood—and which exact form or use applies?
✓
Step 3 · Heading 4403 Wood in the rough, whether or not stripped of bark … 3 of 21 headings under chapter 44
Which child description matches the wood’s type or species, any paint, stain, creosote or other wood-preservative treatment, and—where stated—the minimum cross-section of 15 cm or more or less than 15 cm?
✓
Step 4 · Subheading 4403 25 Coniferous wood in the rough, of which the smallest… 7 of 19 subheadings under heading 4403
Is it roundwood for sawing?
✓
Step 5 · Full code 4403 25 10 Sawlogs, coniferous, of which the smallest cross-se… 1 of 2 codes under subheading 4403 25

Classification complete

4403 25 10

Conifer roundwood for sawing, at least 15 cm, excluding pine, spruce and fir

The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 44032510.

See how EU customs ruled on similar products

One last check

Compare the sibling codes at this level before you settle on this one.

you are here 4403 25 10 Sawlogs, coniferous, of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excl. pine, fir and spruce; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) Duty free
another option 4403 25 90 Coniferous wood in the rough, of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excl. pine, fir and spruce; sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) Duty free

Trade measures to be aware of

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Lower duty for goods from some countries

Preferential rates exist for goods originating in Andorra; San Marino; Türkiye; European Union; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; 33 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
Restrictions and paperwork

Import restrictions are recorded for goods originating in Belarus; North Korea (Democratic People’s Republic of Korea); Iraq; Syria; Ukraine; Russian Federation; Indonesia; any country except Switzerland; 3 more origins.

Document or certificate conditions are recorded. Customs may ask for:
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
Show all 12 document conditions
- Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Goods with third country origin coming from Switzerland, according to the relevant EU legislation.
- Exemption from official controls for plants, other than plants for planting, plant products and other objects, which form part of passengers’ personal luggage and are intended for personal consumption or use (Regulation (EU) 2019/2122 Article 7d)
- Common Health Entry Document for Plants and Plant Products (CHED-PP) (as set out in Part 2, Section C of Annex II to Commission Implementing Regulation (EU) 2019/1715 (OJ L 261))
- Exemption for products intended for scientific purposes in accordance with Article 48(1) of Regulation (EU) 2016/2031
Check this code in the official EU TARIC database

EU tariff measure data version 2026-08-03-tullverket.

Export to Norway

What Norwegian customs charges when goods like these are imported into Norway.

44.03.2501

Without bark

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.
44.03.2509

Other

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.

Norwegian tariff data version 1.5/1.2, last checked Aug. 9, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

Export to the United Kingdom

What UK customs charges when goods like these are imported into the UK.

4403 25 10 00

Sawlogs

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU preferential origin to use this rate.

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1576, last checked Aug. 9, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules

The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 44

Often confused with

4403 25 90 Coniferous wood in the rough, of which the smallest cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excl. pine, fir and spruce; sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) Duty free
This code covers similar conifer roundwood with a minimum cross-section of at least 15 cm, but its title excludes roundwood for sawing.
4407 19 20 Coniferous wood sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm, planed (excl. pine "Pinus spp.", fir "Abies spp.", spruce "Picea spp.", S-P-F, Hem-fir and end-jointed) No rate on file
That code concerns coniferous wood already sawn, cut or peeled lengthwise and over 6 mm thick, rather than roundwood.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.

Conifer roundwood for sawing, at least 15 cm, excluding pine, spruce and fir

Conifer roundwood for sawing, at least 15 cm, excluding pine, spruce and fir

One last check

Trade measures to be aware of

Lower duty for goods from some countries

Restrictions and paperwork

Export to Norway

Export to the United Kingdom

Check the facts that sit outside the code

Similar products elsewhere in the tariff

Often confused with

Save codes to your own collection