Code 4411 13 93 · Subheading 4411 13

Final code reached

HDF MDF fibreboards over 5 mm but not more than 9 mm thick, mechanically worked or surface-covered, excluding laminate flooring

This is a complete 8-digit customs code. There is no further code choice to make below it.

This code covers semi-hard MDF fibreboards with a density of more than 0.8 g/cm³, a thickness of more than 5 mm but not more than 9 mm, and a mechanically worked or surface-covered surface. Laminate flooring is excluded.

For example

HDF MDF fibreboard panel, more than 5 mm but not more than 9 mm thick, mechanically worked and with a density of more than 0.8 g/cm³
Surface-covered HDF MDF fibreboard panel, more than 5 mm but not more than 9 mm thick, with a density of more than 0.8 g/cm³

Save

See the official tariff text

Official tariff text

Medium density fibreboard "MDF" of wood, of a thickness >5mm but <=9mm, of a density >0,8 g/cm³ "HDF", mechanically worked or surface covered (excl. laminate floor coverings)

The path to this code

Every level is settled. Open an earlier step if you need to change a choice.

Step 5 of 5 · Complete

Step 1 · Section IX Wood and articles of wood; wood charcoal; cork and …
Is the item made of wood or charcoal, made of cork, or a basketry or other product made of plaiting materials?
✓
Step 2 · Chapter 44 Wood and articles of wood; wood charcoal 1 of 3 chapters in section IX
Is it charcoal, firewood or wood waste, raw or sawn wood, a wood-based panel, a building or packaging product, cooperage, a tool or tool part, kitchenware, a decorative or household article, or another article of wood—and which exact form or use applies?
✓
Step 3 · Heading 4411 Fibreboard of wood or other ligneous materials, whe… 11 of 21 headings under chapter 44
Is the board MDF, and is its thickness <= 5 mm, > 5 mm but <= 9 mm, or < 9 mm—or, if it is not MDF, is its density > 0.8 g/cm³, > 0.5 but <= 0.8 g/cm³, or <= 0.5 g/cm³?
✓
Step 4 · Subheading 4411 13 Medium density fibreboard "MDF" of wood, of a thick… 2 of 6 subheadings under heading 4411
Is it not mechanically worked or surface-covered; laminate flooring; mechanically worked or surface-covered HDF with a density over 0.8 g/cm³, but not laminate flooring; or mechanically worked or surface-covered HDF with a density of not over 0.8 g/cm³?
✓
Step 5 · Full code 4411 13 93 Medium density fibreboard "MDF" of wood, of a thick… 3 of 4 codes under subheading 4411 13

Classification complete

4411 13 93

HDF MDF fibreboards over 5 mm but not more than 9 mm thick, mechanically worked or surface-covered, excluding laminate flooring

The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 44111393.

See how EU customs ruled on similar products

One last check

Compare the sibling codes at this level before you settle on this one.

another option 4411 13 10 Medium density fibreboard "MDF" of wood, of a thickness > 5 mm but <= 9 mm, not mechanically worked or surface-covered 7.0%
another option 4411 13 91 Laminate floor coverings of medium density fibreboard "MDF" of wood, of a thickness >5mm but <=9mm, of a density >0,8 g/cm³ "HDF" 7.0%
you are here 4411 13 93 Medium density fibreboard "MDF" of wood, of a thickness >5mm but <=9mm, of a density >0,8 g/cm³ "HDF", mechanically worked or surface covered (excl. laminate floor coverings) 7.0%
another option 4411 13 94 Medium density fibreboard "MDF" of wood, of a thickness >5mm but <=9mm, of a density <=0,8 g/cm³, mechanically worked or surface covered 7.0%

Trade measures to be aware of

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Lower duty for goods from some countries

Preferential rates exist for goods originating in Andorra; San Marino; Türkiye; European Union; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; 51 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
Restrictions and paperwork

Import restrictions are recorded for goods originating in Belarus; North Korea (Democratic People’s Republic of Korea); Iraq; Syria; Ukraine; Russian Federation; Indonesia; any country.

Document or certificate conditions are recorded. Customs may ask for:
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
Show all 10 document conditions
- Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Goods not requiring the presentation of a FLEGT import licence for timber
- FLEGT import licence for timber
Check this code in the official EU TARIC database

EU tariff measure data version 2026-08-03-tullverket.

Export to Norway

What Norwegian customs charges when goods like these are imported into Norway.

44.11.1300

Of a thickness exceeding 5 mm but not exceeding 9 mm

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.

Norwegian tariff data version 1.5/1.2, last checked Aug. 9, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

Export to the United Kingdom

What UK customs charges when goods like these are imported into the UK.

4411 13 93 00

Other

Ordinary duty

6.0%

Goods of EU origin

Duty free You need documentation of EU preferential origin to use this rate.

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1576, last checked Aug. 9, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules

The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 44

Often confused with

4411 13 10 Medium density fibreboard "MDF" of wood, of a thickness > 5 mm but <= 9 mm, not mechanically worked or surface-covered 7.0%
That code covers boards of the same thickness range that are not mechanically worked or surface-covered.
4411 13 91 Laminate floor coverings of medium density fibreboard "MDF" of wood, of a thickness >5mm but <=9mm, of a density >0,8 g/cm³ "HDF" 7.0%
That code covers laminate flooring, while this code excludes laminate flooring.
4411 13 94 Medium density fibreboard "MDF" of wood, of a thickness >5mm but <=9mm, of a density <=0,8 g/cm³, mechanically worked or surface covered 7.0%
That code covers mechanically worked or surface-covered HDF MDF boards with a density of not more than 0.8 g/cm³, while this code covers boards with a density of more than 0.8 g/cm³.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.

HDF MDF fibreboards over 5 mm but not more than 9 mm thick, mechanically worked or surface-covered, excluding laminate flooring

HDF MDF fibreboards over 5 mm but not more than 9 mm thick, mechanically worked or surface-covered, excluding laminate flooring

One last check

Trade measures to be aware of

Lower duty for goods from some countries

Restrictions and paperwork

Export to Norway

Export to the United Kingdom

Check the facts that sit outside the code

Similar products elsewhere in the tariff

Often confused with

Save codes to your own collection