Code 7209 26 90 · Subheading 7209 26

Final code reached

Non-electrical, uncoated cold-rolled iron or non-alloy steel sheets, width ≥ 600 mm, thickness > 1 mm but < 3 mm, not in coils

This is a complete 8-digit customs code. There is no further code choice to make below it.

This covers flat, uncoated products of iron or non-alloy steel that are at least 600 mm wide, only cold-rolled, and supplied flat rather than in coils. The thickness must be > 1 mm but < 3 mm, and the products must not be electrical.

For example

A non-electrical, uncoated cold-rolled iron or non-alloy steel sheet, 1.5 mm thick and 600 mm wide, supplied flat and not in a coil
A non-electrical, uncoated cold-rolled iron or non-alloy steel plate, 2.5 mm thick and 1,000 mm wide, supplied flat and not in a coil

Save

See the official tariff text

Official tariff text

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical)

The path to this code

Every level is settled. Open an earlier step if you need to change a choice.

Step 5 of 5 · Complete

Step 1 · Section XV Base metals and articles of base metal
Is it iron or steel; an article made of iron or steel; copper or an article made of copper; nickel or an article made of nickel; aluminium or an article made of aluminium; lead or an article made of lead; zinc or an article made of zinc; tin or an article made of tin; another base metal, sintered metal or cermet, or an article made from one of these; a base-metal tool, implement, knife, spoon or fork, or a part thereof; or another miscellaneous article made of base metal?
✓
Step 2 · Chapter 72 Iron and steel 1 of 11 chapters in section XV
What is the product's form and steel type: pig or mirror iron, ferroalloy, directly reduced or porous iron, waste or scrap, granules or powder, ingot or other raw form, semi-finished product, flat-rolled product, bar, profile or wire—and is it non-alloy, stainless or other alloy steel?
✓
Step 3 · Heading 7209 Flat-rolled products of iron or non-alloy steel, of… 9 of 29 headings under chapter 72
Is it supplied in coils or not in coils, what is its thickness—at least 3 mm, over 1 mm but under 3 mm, at least 0.5 mm but at most 1 mm, or under 0.5 mm—and has it only been cold-rolled or been further worked?
✓
Step 4 · Subheading 7209 26 Flat-rolled products of iron or non-alloy steel, of… 6 of 9 subheadings under heading 7209
Is it an electrical product or a non-electrical product?
✓
Step 5 · Full code 7209 26 90 Flat-rolled products of iron or non-alloy steel, of… 2 of 2 codes under subheading 7209 26

Classification complete

7209 26 90

Non-electrical, uncoated cold-rolled iron or non-alloy steel sheets, width ≥ 600 mm, thickness > 1 mm but < 3 mm, not in coils

The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 72092690.

See how EU customs ruled on similar products

One last check

Compare the sibling codes at this level before you settle on this one.

another option 7209 26 10 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm "electrical" Duty free
you are here 7209 26 90 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mm (excl. electrical) Duty free

Trade measures to be aware of

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Extra duty on goods from some countries

Trade-defence measures, such as anti-dumping duty, may apply to goods originating in China; Russian Federation; India; Japan; Türkiye; Taiwan; Viet Nam; any country except China and Russian Federation.

The duty depends on the producer or exporter, so two shipments of the same goods can be charged differently.
Check this code in the official EU TARIC database
Lower duty for goods from some countries

Preferential rates exist for goods originating in Andorra; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; Western Sahara; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); Ivory Coast; 19 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
A limited quantity at a lower rate

A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in any country except Iceland, India, Japan, Korea, Republic of (South Korea), Liechtenstein, Norway, Taiwan, Türkiye, Ukraine and United Kingdom; FTA partners except Brazil, Egypt, India, Japan, Korea, Republic of (South Korea), Switzerland, Türkiye, Ukraine and United Kingdom; Brazil; Switzerland; Egypt; European Union; United Kingdom; India; 5 more origins.
Check this code in the official EU TARIC database
Restrictions and paperwork

Import restrictions are recorded for goods originating in Belarus; Ukraine; any country except North Korea (Democratic People’s Republic of Korea); North Korea (Democratic People’s Republic of Korea); any country except Russian Federation; Russian Federation; any country except Ceuta, Iceland, Liechtenstein, Melilla, Norway and Switzerland.

Document or certificate conditions are recorded. Customs may ask for:
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Derogation from import prohibition by virtue of Article 4(2) of Council Regulation (EU) 2017/1509
- Goods other than those described in the footnotes linked to the measure
Show all 19 document conditions
- Goods not consigned from North Korea
- Goods other than those described in Annex V (Coal, iron and iron ore) of Reg. (EU) 2017/1509
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- The product is imported from a partner country for importation of iron and steel as listed in Annex XXXVI to Regulation (EU) No 833/2014
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Evidence of the country of origin of the iron and steel inputs used for processing of the product in a third country
- Import authorisation by virtue of article 3g.7 of Council Regulation (EU) 833/2014
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Goods of EU origin (CBAM)
- Goods to be moved or used in the context of military activities - Exemption by virtue Article 2.(3) of Regulation (EU) 2023/956
- Goods originating in Büsingen, Heligoland, or Livigno (Article 2.4 of Regulation (EU) 2023/956)
- CBAM account number
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
Check this code in the official EU TARIC database

EU tariff measure data version 2026-08-03-tullverket.

Export to Norway

What Norwegian customs charges when goods like these are imported into Norway.

72.09.2600

Of a thickness exceeding 1 mm but less than 3 mm

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.

Norwegian tariff data version 1.5/1.2, last checked Aug. 9, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

Export to the United Kingdom

What UK customs charges when goods like these are imported into the UK.

7209 26 90 00

Other

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU preferential origin to use this rate.

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1576, last checked Aug. 3, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules

The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 72

Often confused with

7208 38 00 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, not pickled, without patterns in relief Duty free
That code covers products that are only hot-rolled, in coils, and 3 mm or more but less than 4.75 mm thick; this code covers products that are only cold-rolled, not in coils, and > 1 mm but < 3 mm thick.
7209 26 10 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm "electrical" Duty free
This code is for the electrical version, while this code excludes electrical products.
7211 23 30 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm and of a thickness of >= 0,35 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon (excl. electrical plate) Duty free
That code covers products less than 600 mm wide and with carbon content of < 0.25 weight percent; this code covers products at least 600 mm wide.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.

Non-electrical, uncoated cold-rolled iron or non-alloy steel sheets, width ≥ 600 mm, thickness > 1 mm but < 3 mm, not in coils

Non-electrical, uncoated cold-rolled iron or non-alloy steel sheets, width ≥ 600 mm, thickness > 1 mm but < 3 mm, not in coils

One last check

Trade measures to be aware of

Extra duty on goods from some countries

Lower duty for goods from some countries

A limited quantity at a lower rate

Restrictions and paperwork

Export to Norway

Export to the United Kingdom

Check the facts that sit outside the code

Similar products elsewhere in the tariff

Often confused with

Save codes to your own collection