Code 7211 14 · Heading 7211

Hot-rolled, uncoated iron or non-alloy steel flat products under 600 mm wide and at least 4.75 mm thick, excluding universal steel

This covers flat-rolled products made only by hot rolling from iron or non-alloy steel. They must be under 600 mm wide, at least 4.75 mm thick, not plated, coated or covered, and not universal steel.

Save Browse the codes below

See the official tariff text

Official tariff text

Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")

The path to this code

Every code is reached through these choices, one level at a time.

Step 4 of 4

Step 1 · Section XV Base metals and articles of base metal
Is it iron or steel; an article made of iron or steel; copper or an article made of copper; nickel or an article made of nickel; aluminium or an article made of aluminium; lead or an article made of lead; zinc or an article made of zinc; tin or an article made of tin; another base metal, sintered metal or cermet, or an article made from one of these; a base-metal tool, implement, knife, spoon or fork, or a part thereof; or another miscellaneous article made of base metal?
✓
Step 2 · Chapter 72 Iron and steel 1 of 11 chapters in section XV
What is the product's form and steel type: pig or mirror iron, ferroalloy, directly reduced or porous iron, waste or scrap, granules or powder, ingot or other raw form, semi-finished product, flat-rolled product, bar, profile or wire—and is it non-alloy, stainless or other alloy steel?
✓
Step 3 · Heading 7211 Flat-rolled products of iron or non-alloy steel, of… 11 of 29 headings under chapter 72
Is the product under 600 mm wide, and is it only hot-rolled, only cold-rolled, or hot- or cold-rolled and further worked; if it is only hot-rolled, is it universal steel, at least 4.75 mm thick, or under 4.75 mm thick, and if it is only cold-rolled, does it contain under 0.25 weight-percent or at least 0.25 weight-percent carbon?
✓
Step 4 · Subheading 7211 14 Flat-rolled products of iron or non-alloy steel, of… 2 of 6 subheadings under heading 7211
Which description fits the product: only hot-rolled, under 600 mm wide and at least 4.75 mm thick, excluding universal steel; only hot-rolled, under 600 mm wide and under 4.75 mm thick, excluding universal steel; universal steel only hot-rolled, over 150 mm but under 600 mm wide, at least 4 mm thick, not coiled and without a relief pattern; only cold-rolled with carbon content under 0.25% by weight; only cold-rolled with carbon content at least 0.25% by weight; or hot- or cold-rolled and further worked?

Full 8-digit codes

Pick the description that best matches your product.

1 code below this one

7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") Duty free Save

Compare the sibling codes

7211 13 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 0.0%
7211 14 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") you are here 0.0%
7211 19 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 0.0%
7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 0.0%
7211 29 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 0.0%
7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 0.0%

Export to Norway

What Norwegian customs charges when goods like these are imported into Norway.

72.11.1400

Other, of a thickness of 4.75 mm or more

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.

Norwegian tariff data version 1.5/1.2, last checked Aug. 9, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

Export to the United Kingdom

What UK customs charges when goods like these are imported into the UK.

All 3 UK lines under this code

They all have the same duty rates shown here.

Ordinary duty

Duty free

Goods of EU origin

The ordinary rate applies. The UK lists no separate rate for goods from the EU on this line.

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1576, last checked Aug. 3, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

Check the neighbouring codes

The codes just before and after this one, in case a nearby group fits better.

See all 6 codes at this level

Previous code 7211 13

Flat-rolled products of iron or non-alloy steel, simply hot-rolled on…

you are here 7211 14

Flat-rolled products of iron or non-alloy steel, of a width < 600 mm,…

Next code 7211 19