Classification complete
7225 30 10
Coiled hot-rolled tool-steel flat products, at least 600 mm wide
The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 72253010.
Code 7225 30 10 · Subheading 7225 30
Final code reached
Coiled hot-rolled tool-steel flat products, at least 600 mm wide
This is a complete 8-digit customs code. There is no further code choice to make below it.
This code covers flat-rolled products made of tool steel, at least 600 mm wide, that are only hot-rolled and supplied in coils. They must not be high-speed steel or silicon-electrical steel.
For example
- A coil of hot-rolled tool-steel flat product at least 600 mm wide
Save
See the official tariff text
Official tariff text
Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils
One last check
Compare the sibling codes at this level before you settle on this one.
-
you are here 7225 30 10 Flat-rolled products of tool steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils Duty free*
- another option 7225 30 30 Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils Duty free*
- another option 7225 30 90 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of tool steel, high-speed steel or silicon-electrical steel) Duty free*
Trade measures to be aware of
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
-
Extra duty on goods from some countries
Trade-defence measures, such as anti-dumping duty, may apply to goods originating in China; Iran, Islamic Republic of; Ukraine; Serbia; Brazil; Russian Federation; any country except Brazil, China, Iran, Islamic Republic of, Russian Federation, Serbia and Ukraine.
Check this code in the official EU TARIC database -
Lower duty for goods from some countries
Preferential rates exist for goods originating in Andorra; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; Western Sahara; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); Ivory Coast; 19 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database -
A limited quantity at a lower rate
A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in any country except Australia, Brazil, Egypt, Iceland, India, Indonesia, Japan, Kazakhstan, Korea, Republic of (South Korea), Liechtenstein, North Macedonia, Norway, Saudi Arabia, Serbia, Switzerland, Taiwan, Türkiye, Ukraine, United Kingdom and Viet Nam; FTA partners except Brazil, Egypt, India, Indonesia, Japan, Korea, Republic of (South Korea), North Macedonia, Serbia, Switzerland, Türkiye, Ukraine, United Kingdom and Viet Nam; Australia; Brazil; Switzerland; Egypt; European Union; United Kingdom; 12 more origins.
Check this code in the official EU TARIC database -
Restrictions and paperwork
Import restrictions are recorded for goods originating in Belarus; Ukraine; any country except Ceuta, Iceland, Liechtenstein, Melilla, Norway and Switzerland; Kazakhstan.
Document or certificate conditions are recorded. Customs may ask for:
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Goods of EU origin (CBAM)
Check this code in the official EU TARIC databaseShow all 12 document conditions
- Goods to be moved or used in the context of military activities - Exemption by virtue Article 2.(3) of Regulation (EU) 2023/956
- Goods originating in Büsingen, Heligoland, or Livigno (Article 2.4 of Regulation (EU) 2023/956)
- CBAM account number
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
- Import authorization issued by the competent authority of a Member State which shall be valid throughout the Community
- Certificate of origin for certain steel products originating in Kazakhstan as defined in Article 2 of Reg. 1340/2008
Export to Norway
What Norwegian customs charges when goods like these are imported into Norway.
-
72.25.3000
Other, not further worked than hot-rolled, in coils
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
Export to the United Kingdom
What UK customs charges when goods like these are imported into the UK.
-
7225 30 10 00
Of tool steel
- Ordinary duty
- Duty free*
- Goods of EU origin
- The ordinary rate applies. The UK lists no separate rate for goods from the EU on this line.
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
Before you use the code
Check the facts that sit outside the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
- The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
- Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
- Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
Similar products elsewhere in the tariff
- 7226 91 20 Flat-rolled products of tool steel, of a width of < 600 mm, simply hot-rolled Duty free*
- 7226 91 91 Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of >= 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) Duty free*
- 7226 91 99 Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of < 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) Duty free*
- 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) Duty free*
- 7226 99 70 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc, and products of high-speed steel or silicon-electrical steel) Duty free*
Often confused with
-
7225 30 30
Flat-rolled products of high-speed steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils
Duty free*
This code is for high-speed steel, whereas the present code is for tool steel.
-
7225 30 90
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of tool steel, high-speed steel or silicon-electrical steel)
Duty free*
This code excludes tool steel, whereas the present code covers tool steel.
-
7226 91 20
Flat-rolled products of tool steel, of a width of < 600 mm, simply hot-rolled
Duty free*
This code covers tool-steel flat products less than 600 mm wide, while the present code covers products at least 600 mm wide and in coils.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.