Code 7606 12 93 · Subheading 7606 12

Final code reached

Unpainted, unvarnished or non-plastic-coated rectangular or square aluminium-alloy sheets and strips, at least 3 mm but less than 6 mm thick

This is a complete 8-digit customs code. There is no further code choice to make below it.

This covers rectangular or square sheets and strips made of aluminium alloys, at least 3 mm but less than 6 mm thick. The products must not be painted, varnished or coated with plastic.

For example

An unpainted rectangular aluminium-alloy sheet, 4 mm thick
An unvarnished square aluminium-alloy plate, 5 mm thick
A non-plastic-coated rectangular aluminium-alloy strip, 3 mm thick

Save

See the official tariff text

Official tariff text

Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)

The path to this code

Every level is settled. Open an earlier step if you need to change a choice.

Step 5 of 5 · Complete

Step 1 · Section XV Base metals and articles of base metal
Is it iron or steel; an article made of iron or steel; copper or an article made of copper; nickel or an article made of nickel; aluminium or an article made of aluminium; lead or an article made of lead; zinc or an article made of zinc; tin or an article made of tin; another base metal, sintered metal or cermet, or an article made from one of these; a base-metal tool, implement, knife, spoon or fork, or a part thereof; or another miscellaneous article made of base metal?
✓
Step 2 · Chapter 76 Aluminium and articles thereof 5 of 11 chapters in section XV
What type of aluminium product is it: unwrought aluminium; aluminium waste or scrap; aluminium powder or flakes; bars or profiles; wire; plates or strips thicker than 0.2 mm; foil no thicker than 0.2 mm; tubes; tube fittings; construction products; a tank or similar container with a capacity over 300 l; a smaller container with a capacity no greater than 300 l; a container for compressed or liquefied gas; stranded wire, cables or similar products; household or sanitary articles; or another aluminium product?
✓
Step 3 · Heading 7606 Plates, sheets and strip, of aluminium, of a thickn… 6 of 16 headings under chapter 76
Is it made from unalloyed aluminium or an aluminium alloy, and is its shape rectangular or square, or another shape?
✓
Step 4 · Subheading 7606 12 Plates, sheets and strip, of aluminium alloys, of a… 2 of 4 subheadings under heading 7606
Is it material for drink-can bodies, ends or pull rings; an aluminium composite panel; a painted, lacquered or plastic-coated sheet or strip; or otherwise a sheet or strip classified by thickness as over 0.2 mm but less than 3 mm, at least 3 mm but less than 6 mm, or at least 6 mm?
✓
Step 5 · Full code 7606 12 93 Plates, sheets and strip, of aluminium alloys, of a… 6 of 7 codes under subheading 7606 12

Classification complete

7606 12 93

Unpainted, unvarnished or non-plastic-coated rectangular or square aluminium-alloy sheets and strips, at least 3 mm but less than 6 mm thick

The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 76061293.

See how EU customs ruled on similar products

One last check

Compare the sibling codes at this level before you settle on this one.

another option 7606 12 11 Beverage can body stock, of aluminium alloys, of a thickness of > 0,2 mm 7.5%
another option 7606 12 19 Beverage can end stock and tab stock, of aluminium alloys, of a thickness of > 0,2 mm 7.5%
another option 7606 12 30 Aluminium Composite Panel, of aluminium alloys, of a thickness of > 0,2 mm 7.5%
another option 7606 12 50 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel) 7.5%
another option 7606 12 92 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) 7.5%
you are here 7606 12 93 Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) 7.5%
another option 7606 12 99 Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) 7.5%

Trade measures to be aware of

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Extra duty on goods from some countries

Trade-defence measures, such as anti-dumping duty, may apply to goods originating in China; any country except China; Türkiye.

The duty depends on the producer or exporter, so two shipments of the same goods can be charged differently.

This is recorded on a more detailed code below this one, so it may not cover your goods.
Check this code in the official EU TARIC database
Lower duty for goods from some countries

Preferential rates exist for goods originating in Andorra; San Marino; Türkiye; European Union; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; 51 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
A limited quantity at a lower rate

A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in United Kingdom.
Check this code in the official EU TARIC database
Restrictions and paperwork

Import restrictions are recorded for goods originating in Ukraine; North Korea (Democratic People’s Republic of Korea); Belarus; China; India; Russian Federation; any country except Ceuta, Iceland, Liechtenstein, Melilla, Norway and Switzerland.

Document or certificate conditions are recorded. Customs may ask for:
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Goods other than those described in the footnotes linked to the measure
- Goods other than those described in the MG footnotes linked to the measure (Annex II, Part V of Reg. (EU) 2017/1509)
Show all 21 document conditions
- The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
- The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
- Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
- The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Goods of EU origin (CBAM)
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
- Goods originating in Büsingen, Heligoland, or Livigno (Article 2.4 of Regulation (EU) 2023/956)
- CBAM account number
- Goods to be moved or used in the context of military activities - Exemption by virtue Article 2.(3) of Regulation (EU) 2023/956
- Authorisation to use a customs procedure with economic impact/end-use within the context of an anti-dumping/countervailing measure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)
Check this code in the official EU TARIC database
These goods are monitored

Imports of goods originating in any country except Iceland, Liechtenstein and Norway are counted and reported under this code. This does not restrict the goods, but customs records them.
Check this code in the official EU TARIC database

EU tariff measure data version 2026-08-03-tullverket.

Export to Norway

What Norwegian customs charges when goods like these are imported into Norway.

76.06.1210

Corrugated plates and sheets

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.
76.06.1290

Other

Ordinary duty

Duty free

Goods of EU origin

Duty free You need documentation of EU origin to use this rate.

Norwegian tariff data version 1.5/1.2, last checked Aug. 9, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

Export to the United Kingdom

What UK customs charges when goods like these are imported into the UK.

All 5 UK lines under this code

They all have the same duty rates shown here.

Ordinary duty

6.0%

Goods of EU origin

Duty free You need documentation of EU preferential origin to use this rate.

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1576, last checked Aug. 3, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules

The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 76

Often confused with

7606 12 50 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel) 7.5%
That code covers rectangular or square aluminium-alloy sheets and strips that are painted, varnished or coated with plastic; this code excludes those products.
7606 12 92 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) 7.5%
That code covers the same type of rectangular or square aluminium-alloy sheets and strips when they are more than 0.2 mm but less than 3 mm thick; this code covers at least 3 mm but less than 6 mm.
7606 12 99 Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) 7.5%
That code covers rectangular or square aluminium-alloy sheets and strips at least 6 mm thick; this code covers at least 3 mm but less than 6 mm.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.

Unpainted, unvarnished or non-plastic-coated rectangular or square aluminium-alloy sheets and strips, at least 3 mm but less than 6 mm thick

Unpainted, unvarnished or non-plastic-coated rectangular or square aluminium-alloy sheets and strips, at least 3 mm but less than 6 mm thick

One last check

Trade measures to be aware of

Extra duty on goods from some countries

Lower duty for goods from some countries

A limited quantity at a lower rate

Restrictions and paperwork

These goods are monitored

Export to Norway

Export to the United Kingdom

Check the facts that sit outside the code

Similar products elsewhere in the tariff

Often confused with

Save codes to your own collection