Classification complete
8507 90 31
Plastic-film separators for electric accumulators, thickness <=40 micrometres
The spaces only make the code easier to read. Customs declarations normally use the unspaced form, 85079031.
Code 8507 90 31 · Subheading 8507 90
Final code reached
Plastic-film separators for electric accumulators, thickness <=40 micrometres
This is a complete 8-digit customs code. There is no further code choice to make below it.
This code covers separators for electric accumulators made from plastic film with a thickness of <=40 micrometres. The item must be a separator, not a complete accumulator or another accumulator part.
Save
See the official tariff text
Official tariff text
Separators for electric accumulators, of plastic film of a thickness <=40 μm
One last check
Compare the sibling codes at this level before you settle on this one.
- another option 8507 90 30 Separatorer til elektriske akkumulatorer (undtagen af blødgummi eller tekstilstof) No rate on file
-
you are here 8507 90 31 Separators for electric accumulators, of plastic film of a thickness <=40 μm 2.7%*
- another option 8507 90 39 Separators for electric accumulators (excl. separators of vulcanised rubber other than hard rubber or of textiles, and separators of plastic film of a thickness <=40 μm) 2.7%*
- another option 8507 90 80 Parts of electric accumulators (excl. separators) 2.7%*
Trade measures to be aware of
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
-
Lower duty for goods from some countries
Preferential rates exist for goods originating in Andorra; San Marino; Türkiye; European Union; Economic Partnership Agreements; CARIFORUM except Haiti; Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe; Botswana, Eswatini, Lesotho, Mozambique and Namibia; 51 more origins. Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database -
Restrictions and paperwork
Import restrictions are recorded for goods originating in North Korea (Democratic People’s Republic of Korea) and Ukraine.
Document or certificate conditions are recorded. Customs may ask for:
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Movement certificate EUR.1
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
Export to Norway
What Norwegian customs charges when goods like these are imported into Norway.
-
85.07.9000
Parts
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU origin to use this rate.
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
Export to the United Kingdom
What UK customs charges when goods like these are imported into the UK.
-
8507 90 31 10
For use in civil aircraft
- Ordinary duty
- Duty free*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
-
8507 90 31 20
Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 µm or more but not more than 36 µm
- Ordinary duty
- 2.0%*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
-
8507 90 31 30
Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
- Ordinary duty
- 2.0%*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
-
8507 90 31 40
Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer separator foil with: -one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides, -a width of 65 mm or more but not more than 170 mm, -a total thickness of 10 µm or more but not more than 30 µm, -a porosity of 25 % (vol.) or more but not more than 65 % (vol.)
- Ordinary duty
- 2.0%*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
-
8507 90 31 90
Other
- Ordinary duty
- 2.0%*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
Before you use the code
Check the facts that sit outside the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
- The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
- Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
- Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with SKAT or TARIC.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
Often confused with
-
8507 90 39
Separators for electric accumulators (excl. separators of vulcanised rubber other than hard rubber or of textiles, and separators of plastic film of a thickness <=40 μm)
2.7%*
That code covers accumulator separators excluding plastic-film separators with a thickness of <=40 micrometres; this code specifically covers those plastic-film separators.
-
8507 90 80
Parts of electric accumulators (excl. separators)
2.7%*
That code covers other parts for electric accumulators, excluding accumulator plates, whereas this code covers separators made from plastic film with a thickness of <=40 micrometres.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with SKAT, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.